Community Apps

This plugin shows any open files on the array that might prevent a clean shutdown. The plugin web page is installed in 'Tools'. You can stop all array processes on the open files web page and troubleshoot shutdown problems. After you stop all array processes, you will see what processes are still holding files open on the array preventing a shutdown.

This package contains and installs the OpenRGB Patch that needs to be installed in conjunction with the OpenRGB Docker container to take full controll over your RGB lighting. To see all the RGB devices you have to pass through the devices /sys/bus/i2c/device and /dev/i2c-0 to the OpenRGB Docker container and maybe all other /dev/i2c-X devices (where you have to replace X with the number from the device to pass through).

Open-VM-Tools for running unRAID as a VM under ESXi.

Fine-tune the execution of long-running array opperations such as Parity Check, Parity-Sync/Data Rebuid and Disk Clear so that they are automatically run in increments at convenient times rather than having to run to completion uninterrupted. Also allows for such operations to be automatically paused (and later resumed) if disk temperatures exceed specified thresholds.

Is a slim plugin, that takes informations gathered form the MSI Afterburner Remote Server API and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. This plugin requires the MSI Afterburner Remote Server on the machine that you want to watch, please configure the IP address of your local MSI Afterburner Remote Server on the Settings page from the plugin! Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9091/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9091' to your Prometheus yaml). This Plugin is based on: https://github.com/kennedyoliveira/prometheus-msi-afterburner-exporter

Is a slim plugin, that takes informations gathered from nvidia-smi and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9202/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9202' to your Prometheus yaml). This Plugin is based on: https://github.com/e7d/docker-prometheus-nvidiasmi

Is a slim plugin, that takes informations gathered from your Fritzbox and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9042/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9042' to your Prometheus yaml). This Plugin is based on fritzbox-exporter from sberk42: https://github.com/sberk42/fritzbox_exporter

Is a slim plugin, that takes informations gathered form your unRAID system and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9100/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9100' to your Prometheus yaml). This Plugin is based on node_exporter: https://github.com/prometheus/node_exporter

Is a slim plugin, that takes informations gathered from the Pi-Hole API and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9617/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9617' to your Prometheus yaml). This Plugin is based on pihole-exporter from eko: https://github.com/eko/pihole-exporter

This plugin takes informations gathered from the wireguard API and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9586/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9586' to your Prometheus yaml). This Plugin is based on prometheus_wireguard_exporter from MindFlavor: https://github.com/MindFlavor/prometheus_wireguard_exporter

This plugin is to control pwm fans for CPU or HDD. CPU single Fan mode, HDD multi Fan mode possible

Installs python3, pip and setuptools onto Unraid systems. No library issues, fully compatible with Unraid 6 and 7.

This package contains and installs the QNAP Embedded Controller chip Kernel module, this allows you to read fan speeds and temperatures as well as reading and writing the fan PWM values from the ITE Tech Inc. IT8528 embedded controller chip. Currently known supported units are: TS-473A, TS-673A, TS-873A, TS-h886, TS-453Be, TS-877, TS-1677x, TS-253B, TS-453A, TS-464 Source: https://github.com/Stonyx/QNAP-EC

The Quassel Notify plugin allows you to receive Pushbullet notifications based on keywords from Quassel Core Server. It uses PyQuassel which is a pure python implementation of QuasselClient. Doesn't depend on any PySide or PyQt libraries.

This plugin adds the tool 'radeontop' to your unRAID server and also enables your AMD GPU from the installation of this plugin on, so no editis to the 'go' file or creation of other files are necessary (please not that this plugin only enables the 'amdgpu' Kernel module and not the 'radeon' Kernel module). To see the usage of your GPU open up the unRAID Terminal and type in 'radeontop' (without quotes). This plugin satisfies installation prerequisites of the GPU Statistics plugin from Community Apps. With both plugins installed you can display AMD GPU utilization on the unRAID Dashboard.

The Plugin aims to reduce the wear on your SSD by moving the docker status and log files into your RAM.

The plugin installs rclone. rclone is a command line program to sync files and directories to and from services such as: Amazon Drive Amazon S3 Backblaze B2 Box Dropbox FTP Google Cloud Storage Google Drive HTTP Microsoft Azure Blob Storage Microsoft OneDrive Nextcloud ownCloud SFTP WebDAV The local filesystem * And many more Go to http://rclone.org/ for more information.

This plugin adds RCON to your unRAID server and enables your to connecto to various servers who are following the RCON protocol standard. Simply issue 'rcon -h' from an unRAID Terminal and you get an overview on how to connect. A basic connection command will look like this: 'rcon -a RCONIP:RCONPORT -p PASSWORD' to end the connection press CTRL + C. ATTENTION: The RCON protocol transmits everything un-encrypted (including your password!). Therefore it is strongly recommended to not connect to RCON over the internet rather it is recommended to use a VPN or SSH if you want to connect to a foreign server over the internet. Source: https://github.com/n0la/rcon

This plugin adds a per share .Recycle.Bin folder to hold samba deleted files until you empty the trash either manually or remove aged files on a schedule. Shares that are excluded will not have the recycle bin enabled. A .Recycle.Bin folder is created in each share the first time a file is deleted in the share that you can access by browsing to //Tower/Share/.Recycle.Bin. You can restore deleted files from the //Tower/Share/.Recycle.Bin. The User access to the .Recycle.Bin folder is the same as the User share access. If you remove the plugin all deleted files will be kept in the share .Recycle.Bin folders. You will have to empty the trash before you remove the plugin if you do not want to use it.

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). The following Chipsets are supported by this driver: Network Interface Controllers > 2.5G Gigabit Ethernet > PCI Express RTL8125 / RTL8125B(S)(G) Source: https://github.com/jinlife/unraid-r8125-r8152-driver

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). The following Chipsets are supported by this driver: Network Interface Controllers > 5G Gigabit Ethernet > PCI Express RTL8126 Source: https://github.com/jinlife/unraid-r8125-r8152-driver

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). ATTENTION: To utilize 2.5Gbit/s speeds you have to add this line at the bottom to your 'go' file: 'ethtool -s eth0 autoneg on advertise 0x80000000002f' (without quotes and modify eth0 to the corresponding adapter in your system)! To utilize 5Gbit/s speeds you have to add this line at the bottom to your 'go' file: 'ethtool -s eth0 autoneg on advertise 0x180000000002f' The following Chipsets are supported by this driver: Network Interface Controllers > 5G Gigabit Ethernet > USB 3.0 RTL8157 Network Interface Controllers > 2.5G Gigabit Ethernet > USB 3.0 RTL8156 / RTL8156B Network Interface Controllers > 10/100/1000M Gigabit Ethernet > USB 3.0 RTL8153 / RTL8153B / RTL8153C / RTL8153D / RTL8153E Network Interface Controllers > 10/100/1000M Gigabit Ethernet > USB 2.0 RTL8154 / RTL8154B Network Interface Controllers > 10/100M Fast Ethernet > USB 2.0 RTL8152B Source: https://github.com/jinlife/unraid-r8125-r8152-driver

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). The following Chipsets are supported by this driver: Network Interface Controllers > 10/100/1000M Gigabit Ethernet > PCI Express RTL8111B/RTL8111C/RTL8111D/RTL8111E/RTL8111F/RTL8111G(S)/RTL8111H(S)//RTL8118(A)(S)/RTL8119i/RTL8111L/RTL8111K RTL8168B/RTL8168E/RTL8168H RTL8111DP/RTL8111EP/RTL8111FP RTL8411/RTL8411B Source: https://github.com/jinlife/unraid-r8125-r8152-driver

Sanoid is a policy-driven snapshot management tool for ZFS filesystems. When combined with the Linux KVM hypervisor, you can use it to make your systems functionally immortal.

Spin down idle SAS drives the same way SATA drives are spun down. If you have SAS spinning drives in your array, you may have noticed that Unraid, while asserting that they have been spun down, does not in fact spin them down (true at least up until version 6.8.3). This plugin attempts to ensure that SAS drives spin down and up in sync with Unraid schedule (i.e. same as SATA drives).

Simple mover addon, mainly considered for Media Files to keep on cache. NO replacement for regular mover or mover tuning, actually mover tuning is mandatory for exclusion

A plugin for advanced users installing SnapRAID onto UNRAID systems, now with support for multiple arrays.

Provides GUI for BTRFS Snapshots.

Use this plugin to change primary SSH configuration settings and enable Public Key authentication on a per user basis. It also gives the ability to stop/start and enable/disable the service.

By special request on the Unraid Discord: cure your bad habit of mistyping.