Community Apps

xteve, guide2go, owi2plex in one docker with cron access xteve webui ip:34400/web/ after docker start check your config folder and do your setups, setup is persistent, start from scratch by delete them cron and xteve start options are updated on docker restart. setup guide2go SD subscrition as follows or copy your existing .yaml files into your mounted /guide2go folder docker exec -it "dockername" guide2go -configure /guide2go/"your_epg_name".yaml to test the cronjob functions docker exec -it "dockername" ./config/cronjob.sh included functions are (all can be individual turned on / off) xteve - iptv and epg proxy server for plex, emby, etc ... thanks to @marmei guide2go - xmltv epg grabber for schedules direct, thanks to @marmei owi2plex - xmltv epg grabber for enigma receivers using open web, thanks to @cvarelaruiz some small script lines cause i personally use tvheadend and get playlist for xteve and cp xml data to tvheadend

xteve, guide2go in one docker with cron setup guide2go SD subscrition as follows or copy your existing .json files into your mounted /guide2go folder docker exec -it "dockername" guide2go -configure /guide2go/"your_epg_name".yaml to test the cronjob functions docker exec -it <dockername> ./config/cronjob.sh included functions are (all can be individual turned on / off) xteve - iptv and epg proxy server for plex, emby, etc ... thanks to @marmei website: http://xteve.de Discord: https://discordapp.com/channels/465222357754314767/465222357754314773 guide2go - xmltv epg grabber for schedules direct, thanks to @marmei github: https://github.com/mar-mei/guide2go Schedules Direct web: http://www.schedulesdirect.org/ some small script lines cause i personally use tvheadend and get playlist for xteve and cp xml data to tvheadend

xteve, in docker with ovpn docker runs in bridge mode IMPORTANT, if ipv6 is active in your network, set in extra parameters ...disable_ipv6=1 put your ovpn file in /config edit your ovpn credentials in /config set your LOCAL_NET to fir your netmask access xteve webui ip:34400/web/

xTeVe is a M3U proxy server for Plex, Emby and any client and provider which supports the .TS and .M3U8 (HLS) streaming formats.xTeVe emulates a SiliconDust HDHomeRun OTA tuner, which allows it to expose IPTV style channels to software, which would not normally support it.OpenVPN has been added to the container to allow users who have issues with their ISP shaping IPTV to bypass the shaping using a VPNI built this VPN version to bypass my ISP shaping during peak usage times. In the evenings I noticed my IPTV channels were freezing and timing out. After some back and forth between myself and the IPTV provider I came to the realisation that its my ISP that's the cause. Hopefully it helps others out there as its helped me.ConfigurationPlease refer to my github repo xteve-vpn;

This is a docker image of Thunder downloader. After running, please see your binding code through the log pannel. 这是一个迅雷的Docker镜像。 运行后请在log页面查看您的配对码。

XWiki is a free wiki software platform written in Java with a design emphasis on extensibility. XWiki is an enterprise wiki. It includes WYSIWYG editing, OpenDocument based document import/export, semantic annotations and tagging, and advanced permissions management.

A web interface for managing docker containers with an emphasis on templating to provide one-click deployments of dockerized applications. Think of it as a decentralized app store for servers that anyone can make packages for. The default login is "[email protected]" and "pass". You should change this immediately by clicking on admin in the top right and then "User" then select "Change Password" in the top menu. You can also change your username using this field. If you need to reset your password/username to the included defaults, please delete your yacht volume and create a new one (you will lose all of your configurations so be sure to backup when you make changes). All credits to the developers. This is only a template for the community.

Headless version of the YACReaderLibraryServer. YACReader is the best comic reader and comic manager available, with support for cbr, cbz, zip, and rar comic files. YACReaderLibraryServer makes it easy to run a home comics server to serve your comics to any device running a YACReader client (including Windows, MacOS, Linux, and iOS).

YaCy decentralized search engine (https://yacy.net)Default user/passwordUser: adminPassword: yacy Set an admin account immediately after the first start-up. Open: http://ServerIP:8090/ConfigAccounts_p.html

Your_spotify(https://github.com/Yooooomi/your_spotify) is a self-hosted application that tracks what you listen and offers you a dashboard to explore statistics about it! It's composed of a web server which polls the Spotify API every now and then and a web application on which you can explore your statistics.

YOURLS is a set of PHP scripts that will allow you to run Your Own URL Shortener.

A project management tool that can be adapted to your processes to help you deliver great products. Track projects and tasks, use agile boards, plan sprints and releases, keep a knowledge base, work with reports and dashboards, create workflows that follow your business processes. Never force your process to fit the limits of a tool again. Unlike other project management tools, YouTrack can be customized to your needs!

YoutubeDL-Material is a self-hosted youtube-dl Server with a modern Material-based GUI and the capability to apply advanced configurations, like setting your own download paths based on rules. It is designed to be more customizable than the alternatives out there. It will also keep a record of already downloaded items. Enjoy! :)

Web / REST interface for downloading youtube videos onto a server. Enter a video url to download the video to the server. Url can be to YouTube or any other supported site. The server will automatically download the highest quality version available. Just navigate to http://{{address}}:{{port}}/youtube-dl and enter the requested {{url}}. curl -X POST --data-urlencode "url={{url}}" http://{{address}}:{{port}}/youtube-dl/q /youtube-dl : Downloads go there

Automate downloads and metadata generation with YoutubeDL. This is the headless variant. See ytdl-sub-gui for a web-gui version.

Automate downloads and metadata generation with YoutubeDL. The GUI image runs code-server with ytdl-sub preinstalled and can be accessed at https://localhost:8443

A Web GUI for yt-dlp

Z80Pack is an emulator for emulating CP/M 1, CP/M 2, CP/M 3, and MP/M II on Linux. This is a command line Docker only. There is a built in Shell in a Box WebGUI that is a command line browser window. You can also execute bash in the Docker. Configuration: /config - this path is used to store the disk configurations and CP/M and MP/M startup scripts. To log into the WebUI: User: vintage Password: computer Note: You will have to use the command 'sudo ./cpm' to run the simulator with root privileges.

This container is just official Zabbix Agent image. Any Zabbix Server configuration/setup will need to be completed by yourself. To set this container up just edit the following: "ZABBIX_SERVER_HOSTNAME" to your unraid server hostname "ZABBIX_SERVER_IP" to the IP address of your Zabbix Server or Proxy If you would like Zabbix to monitor disks as well as system resources you will need to add each one as a path manually. Please view the guide available on the forums.

This Docker will download and install Zandronum Server and run it. Zandronum brings classic Doom into the 21st century, maintaining the essence of what has made Doom great for so many years and, at the same time, adding new features to modernize it, creating a fresh, fun new experience. ATTENTION: You have to place your wad files into the '/wads' folder to complete the startup of the server (If you place more than one wad file in the folder you have to append the GAME_PARAMS with for example: '-iwad DOOM2.WAD' - without quotes - to load like in this example DOOM2, also note that the wad file is case sensitive).

Docker container to install and run Zappiti Server app as a local Cloud to manage your library using your Unraid server. Your files used for the collection are saved only on your machine.

Zerotier is an open source, cross-platform virtual LAN / VPN

Allows you to use ZFS format on non Array disks.

The ZFS Master plugin provides information and control over the ZFS Pools in your Unraid. Available ZFS Pools are listed under the "Main/ZFSMaster" tab.

This plugins wants to be the sidekick to unRAID-ZFS from Steini1984, adding a widget for the dashboard, and possibly some APIs to get the status (ie. to use with HomeAssistant).

A file upload server (ShareX/Flameshot) that is easy to use, packed with features, and easy to setup! This Unraid configuration is setup and ready to deploy and use instantly, the only configuration necessary is providing your PostgreSQL credentials as a connection string. An external PostgreSQL (14 or higher) database is required! Once the container has started you can visit Zipline's webUI (default port 8092), the default login credentials are: Username: administrator Password: password For advanced configuration, expand the settings when creating the container. Additionally, see a full list of available environment variables in the documentation: (https://zipline.diced.sh/docs/config)

ZFS backup with remote capabilities

Znc(http://wiki.znc.in/ZNC) is an IRC network bouncer or BNC. It can detach the client from the actual IRC server, and also from selected channels. Multiple clients from different locations can connect to a single ZNC account simultaneously and therefore appear under the same nickname on IRC.

ZNC is an IRC network bouncer or BNC. It can detach the client from the actual IRC server, and also from selected channels. Multiple clients from different locations can connect to a single ZNC account simultaneously and therefore appear under the same nickname on IRC. It supports Transport Layer Security connections and IPv6. DEFAULT CREDENTIALS: Username: admin Password: admin

This Docker will download and install SteamCMD. It will also install Zombie Panic! Source and run it. PASSWORD: The initial Password is: 'Docker' and the initial RCON Password is: 'adminDocker' (without quotes). ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!