Community Apps

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local MMX (NOT CHIA) plots. Connects to the main Machinaris application. x86_64 required, MMX does not support aarch64. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

Tagbox lets you identify the content of images by getting a list of ordered tags.

Videobox extracts frames from videos and passes them to other Machine Box boxes for processing.

Macinabox downloads and installs various macOS versions as a VM on your Unraid server. With this new version, there’s no need for additional helper scripts. It will fully automate the installation of the VM, create the XML file, and select the latest q35 available on your server. All you need to do is choose the macOS version, specify the VM storage location, ISO location, and the container will handle the rest. Usage When run will download and install selected version of macOS as a VM if not present. If selected macOS vm is already present it will check the vms xml and fix if necessary Variables in the container Are you fully compliant with Apple’s EULA? Set this to "Yes" if you are running on Apple hardware. This is the only way to be EULA compliant. If not, leave it as "No" and the container will exit. Operating System Version: Choose the macOS version from the options below: - Sequoia - Sonoma - Ventura --recommend install - Monterey - Big Sur - Catalina - Mojave - High Sierra Custom VM Name: Use this if you want the VM name to differ from the OS version. Leave blank to use the OS name. Vdisk Type: Set the vdisk type to either raw or qcow2. Vdisk Size: Specify the desired size for the vdisk. Delete and Replace OpenCore: Select "Yes" to delete your VM's OpenCore image and replace it with a fresh one, or "No" to keep the existing one. Default NIC Type: Big Sur and newer default is 'virtio-net' older macos versions it is e1000-82545em. Change this to override the default NIC type for macOS versions that support it. VM Images Location: Set this to your VM storage location (e.g., Domains share). ISOs Share Location: This is where macinabox will store the install media Appdata Location: Specify where you want macinabox to store its appdata. Notes - If you want multiple versions of the same macOS, ensure each has a unique name in the Custom VM Name box In Unraid versions below 7, custom elements in the VM template will be removed if vm template edited.. Unraid, in all versions, might also change the NIC bus and slot that macOS expects. Re-run the container to fix the edited vm template after any edits. The container dynamically builds the XML template during VM installation based on settings. It checks the highest QEMU version available and uses it in the template. If you downgrade Unraid, re-run Macinabox to adjust the XML accordingly. You can view container activity via logs or Unraid browser notifications, if enabled. Default icon for macinbox is installed with the VM.This doesnt perist over server reboots. To restore run container again. For all macOS icons (and many other systems) please install vm_custom_icons container.

Mafl is an intuitive service for organizing your homepage. Customize Mafl to your individual needs and work even more efficiently!

magnetico is an autonomous (self-hosted) BitTorrent DHT indexer / crawler / search engine suite.

Scans a IMAP Inbox and post every Mail to a Slack Channel

MailgunLogger is a simple admin tool that uses the Mailgun API to retrieves events on a regular basis from Mailgun - who only provide a limited time of event storage - and stores them inside a MySQL database.

Mailpit is a multi-platform email testing tool & API for developers. It acts as both an SMTP server, and provides a web interface to view all captured emails. It also contains an API for automated integration testing. Mailpit is inspired by MailHog, but modern and much, much faster.

Mailrise is an SMTP server that converts the emails it receives into Apprise⁠ notifications. The intended use case is as an email relay for a home lab or network. By accepting ordinary email, Mailrise enables Linux servers, Internet of Things devices, surveillance systems, and outdated software to gain access to the full suite of 60+ notification services supported by Apprise, from Matrix to Nextcloud to your desktop or mobile device. To learn more, please visit the project page⁠: https://github.com/YoRyan/mailrise

A modified version of Pelican-Panel to work easier with UnRaid

A modified version of Pelican-Wing to work easier with UnRaid

Mainsail makes Klipper more accessible by adding a lightweight, responsive web user interface, centred around an intuitive and consistent design philosophy. Download config.json BEFORE you start your container https://raw.githubusercontent.com/patrickstigler/unraid_app_templates/main/mainsail/config.json And put it in your config folder, the default is /mnt/user/appdata/mainsail/config.json Happy printing

Maintainerr makes managing your media easy. Create custom rules with parameters across different services, show matching media on the Plex home screen for a given amount of days and handle the deletion.

MakeMKV is your one-click solution to convert video that you own into free and patents-unencumbered format that can be played everywhere. MakeMKV is a format converter, otherwise called "transcoder". It converts the video clips from proprietary (and usually encrypted) disc into a set of MKV files, preserving most information but not changing it in any way. The MKV format can store multiple video/audio tracks with all meta-information and preserve chapters. The GUI of the application is accessed through a modern web browser (no installation or configuration needed on the client side) or via any VNC client. Also, being based on Alpine Linux, size of this container is very small. A fully automated mode is also available: insert a DVD or Blu-ray disc into an optical drive and let MakeMKV rips it without any user interaction. For a complete documentation of this container, see https://github.com/jlesage/docker-makemkv#readme NOTE: For the container to have access to your optical drive(s), you need to add them to your container configuration. This is done by adding a new "Device". An optical drive is represented by two Linux device files: "/dev/srX" and "/dev/sgY". For optimal performance, the container needs both of them. To determine the right devices to use, start the container and look at its log.

Mailserver is an all-in-one SMTP/IMAP utility that also includes many features such as Anti-Spam/Virus filters.

Postfixadmin is an administrative interface for malfurious-mailserver. Roundcube is a fast and efficient Webmail client.

Self-hosted music scrobble database to create personal listening statistics and charts as a substitute for Last.fm / Libre.fm / GNU FM. Features include: * Easy import of existing scrobble data in CSV format (from last.fm, etc.) * Custom rules for importing/scrobbling * Custom and 3rd party integrations for album/artist artwork * Insightful charting to display time-sliced "top charts" for tracks and artists * Full listening history and track lookup using multiple sources (youtube, gmusic, spotify..) * A first-party chrome extension for scrobbling from the web as well as third-party scrobble-compliant endpoints for use with other extensions and applications See the project, https://github.com/krateng/maloja, for more information or the support thread for recommended setup.