Community Apps

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local MMX (NOT CHIA) plots. Connects to the main Machinaris application. x86_64 required, MMX does not support aarch64. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

Tagbox lets you identify the content of images by getting a list of ordered tags.

Videobox extracts frames from videos and passes them to other Machine Box boxes for processing.

Downloads and installs a macOS VM. Either Monterey, Big Sur, Catalina, Mojave or High Sierra. It will download the install media from Apple servers and convert it to a usable format for use for a VM. It can fully autoinstall a macOS VM on the server. Also it can prepare all files ready for a manual install if you prefer. Tools are also provided to fix the xml when the custom xml has been stripped out of the VM after its been edited by the Unraid VM manager. Usage Operating System Version: Choose version from below Big Sur (default) Monterey Catalina Mojave High Sierra VM Images Location: Location of your vm share ( default /mnt/user/domains/ ) Install Type: Auto install # (This will download MacOS and install needed files into your VM location.) Manual- install # (This will download MacOS and put all needed files into correct place ready for easy manual install.) Vdisk size : The size you want your vdisk to be created Vdisk type: Set vdisk type raw or qcow2 Opencore stock or custom: Select the defualt Opencore in Macinabox or use one added in macinabox appdata in the folder custom_opencore Delete and replace Opencore: Select No or Yes to delete your vms opencore image and replace with fresh one. Override defualt NIC type: Default No - Override the default nic type in the vm going to be installed. VM Images Location: You only need to change if your VM images are not in the default location /mnt/user/domains VM Images Location AGAIN: Only needs changing if you changed the above. Location must match the above. Isos Share Location: This is where macinabox will put install media and Opencore bootloader Isos Share Location AGAIN: You only need to change if your ISO images are not in the default location /mnt/user/isos appdata location: If you change this you will need to do the same in the macinabox help user script

magnetico is an autonomous (self-hosted) BitTorrent DHT indexer / crawler / search engine suite.

Scans a IMAP Inbox and post every Mail to a Slack Channel

MailgunLogger is a simple admin tool that uses the Mailgun API to retrieves events on a regular basis from Mailgun - who only provide a limited time of event storage - and stores them inside a MySQL database.

Mailpit is a multi-platform email testing tool & API for developers. It acts as both an SMTP server, and provides a web interface to view all captured emails. It also contains an API for automated integration testing. Mailpit is inspired by MailHog, but modern and much, much faster.

Mainsail makes Klipper more accessible by adding a lightweight, responsive web user interface, centred around an intuitive and consistent design philosophy. Download config.json BEFORE you start your container https://raw.githubusercontent.com/patrickstigler/unraid_app_templates/main/mainsail/config.json And put it in your config folder, the default is /mnt/user/appdata/mainsail/config.json Happy printing

Maintainerr makes managing your media easy. Create custom rules with parameters across different services, show matching media on the Plex home screen for a given amount of days and handle the deletion.

MakeMKV is your one-click solution to convert video that you own into free and patents-unencumbered format that can be played everywhere. MakeMKV is a format converter, otherwise called "transcoder". It converts the video clips from proprietary (and usually encrypted) disc into a set of MKV files, preserving most information but not changing it in any way. The MKV format can store multiple video/audio tracks with all meta-information and preserve chapters. The GUI of the application is accessed through a modern web browser (no installation or configuration needed on the client side) or via any VNC client. A fully automated mode is also available: insert a DVD or Blu-ray disc into an optical drive and let MakeMKV rips it without any user interaction. Also, being based on Alpine Linux, size of this container is very small. For a complete documentation of this container, see https://github.com/jlesage/docker-makemkv#readme NOTE: For the container to have access to your optical drive(s), you need to add them to your container configuration. This is done by adding a new "Device". An optical drive is represented by two Linux device files: "/dev/srX" and "/dev/sgY". For optimal performance, the container needs both of them. To determine the right devices to use, start the container and look at its log.

Mailserver is an all-in-one SMTP/IMAP utility that also includes many features such as Anti-Spam/Virus filters.

Postfixadmin is an administrative interface for malfurious-mailserver. Roundcube is a fast and efficient Webmail client.

Self-hosted music scrobble database to create personal listening statistics and charts as a substitute for Last.fm / Libre.fm / GNU FM. Features include: * Easy import of existing scrobble data in CSV format (from last.fm, etc.) * Custom rules for importing/scrobbling * Custom and 3rd party integrations for album/artist artwork * Insightful charting to display time-sliced "top charts" for tracks and artists * Full listening history and track lookup using multiple sources (youtube, gmusic, spotify..) * A first-party chrome extension for scrobbling from the web as well as third-party scrobble-compliant endpoints for use with other extensions and applications See the project, https://github.com/krateng/maloja, for more information or the support thread for recommended setup.

Mango is a self-hosted manga server and reader. Its features include - Multi-user support - OPDS support - Dark/light mode switch - Supported formats: .cbz, .zip, .cbr and .rar - Supports nested folders in library - Automatically stores reading progress - Thumbnail generation - Supports plugins to download from third-party sites - The web reader is responsive and works well on mobile, so there is no need for a mobile app - All the static files are embedded in the binary, so the deployment process is easy and painless

Mariadb(https://mariadb.org/) is one of the most popular database servers. Made by the original developers of MySQL.

Official MariaDB database container. It allows to set a database and username without using the console. MariaDB is a community-developed, commercially supported fork of MySQL (RDBMS). Root Password: This container creates by default a random root password on initial execution. Open Docker > MariaDB Icon > Logs > Scroll down to "GENERATED ROOT PASSWORD" to find it. Creating database dumps docker exec MariaDB-Official sh -c 'exec mysqldump --all-databases -uroot -p"YOUR_ROOT_PASSWORD"' > /mnt/user/Backups/all-databases.sql Restoring data from dump files docker exec -i MariaDB-Official sh -c 'exec mysql -uroot -p"YOUR_ROOT_PASSWORD"' < /mnt/user/Backups/all-databases.sql

Mastodon(https://github.com/mastodon/mastodon/) is a free, open-source social network server based on ActivityPub where users can follow friends and discover new ones..