Community Apps

Membarr is a discord bot that invites discord users to Plex and/or Jellyfin. Manually create users and invite server members with a single command, or let Membarr automatically add server members with a certain role.

minimal ics / iCal / Calendar hoster, is basically just a minimalistic webserver which will just publish the "file.ics" in the data directory. I use it to provide the Ical to Home Assistant for the garbage collection.

Mochad is a TCP gateway to access the CM15a and CM19 X-10 interfaces

MQTT Data Broker

This container is a minimal port of the official Eclipse Mosquitto Docker container with minor tweaks to work more conveniently in unRAID. Configuration To set up paths and ports, see the descriptions in the unRAID docker settings page. To further control mosquitto configuration, place a mosquitto.conf file in the config path, or start the container one time and it will write a template mosquitto.conf.example file to the config path for you to copy and edit. For further details, refer to the full README at https://github.com/cmccambridge/mosquitto-unraid/blob/master/README.md

MQTT for Unraid6 Docker Manager running on Port 1883 and 9001 MQTT is a machine-to-machine (M2M)/"Internet of Things" connectivity protocol. It was designed as an extremely lightweight publish/subscribe messaging transport. It is useful for connections with remote locations where a small code footprint is required and/or network bandwidth is at a premium. For example, it has been used in sensors communicating to a broker via satellite link, over occasional dial-up connections with healthcare providers, and in a range of home automation and small device scenarios. It is also ideal for mobile applications because of its small size, low power usage, minimised data packets, and efficient distribution of information to one or many receivers This version supports passwords - see passwords.README in the /config directory. Also supported are websockets and certificates. The docker is built on a LinuxServer.io template, but be assured that any bugs are mine!.

A media server that allows you to stream audio files (e.g. music and audiobooks) that are stored on your unRAID server to Alexa enabled devices such as Amazon Echo or Amazon Dot using voice control. More details and the full list of features can be found on the My Media For Alexa web site. Additional detail on setting up My Media For Alexa on unRAID can be found here To administer the My Media For Alexa server use the WebUI.

n8n (pronounced n-eight-n) helps you to interconnect every app with an API in the world with each other to share and manipulate its data without a single line of code. It is an easy to use, user-friendly and highly customizable service, which uses an intuitive user interface for you to design your unique workflows very fast. Hosted on your server and not based in the cloud, it keeps your sensible data very secure in your own trusted database. Configuration Config : Storing n8n config and SQL Lite db for your personal workflows. Timezone : (Optional) Required for scheduling to know what time zone the workflows should be started. See https://momentjs.com/timezone/ to find your timezone string. Webhook Tunnel: (Optional) Set the webhook URL manually to correctly display in Editor UI and for it to get registered correctly with external services. Must have trailing slash. (e.g.'http://192.168.1.161:5678/') Important: To avoid `permission denied` errors, you must ensure the user id and group id of that appdata folder to user:group of 1000:1000. Run this command in the terminal `chown 1000:1000 /mnt/cache/appdata/n8n`.

NodeLink is a Node Server which creates nodes (virtual devices) within the ISY.

Node-RED is a visual tool for wiring the Internet of Things Node-RED is a tool for wiring together hardware devices, APIs and online services in new and interesting ways. See NodeRed.org and flows.nodered.org for more info. NodeRed will run on port 1880. This is the official Docker release from the NodeRed team - I just created the template. Directions: /data : in this path, Node Red will store it's configuration files. 15.SEP.2016:First template

Node-RED is a visual tool for wiring the Internet of Things Node-RED is a tool for wiring together hardware devices, APIs and online services in new and interesting ways. See NodeRed.org and flows.nodered.org for more info. NodeRed will run on port 1880. This is the official BETA Version 2 Docker release from the NodeRed team - I just created the template. Directions: /data : in this path, Node Red will store it's configuration files. 15.JUN.2021:First template

NSPanel Manager is a custom software solution for the Sonoff NSPanel (not the NSPanel pro). The software is designed to be easy to use on a day-to-day basis and to easily manage multiple NSPanels around your home. The interface on the NSPanel itself has been designed to be intuitive to use for people of all ages and backgrounds. All the NSPanels that are installed with the NSPanel Manager solution communicate back to a Docker container that is used to manage the panels, NSPanel Manager specific solutions and also all communication back and forth to/from Home Assistant and/or OpenHAB.

A very thin HTTP wrapper around the OpenALPR cli binary - Used for the plate-minder docker container

A self-hosted, offline, ChatGPT-like chatbot with open source LLM support. 100% private, with no data leaving your device.

A self-hosted, offline, ChatGPT-like chatbot with open source LLM support. 100% private, with no data leaving your device. Please note that this version requires an NVIDIA GPU with the Unraid NVIDIA-DRIVER plugin.

openHAB - a vendor and technology agnostic open source automation software for your home. For sample rules etc. have a look at https://github.com/maschhoff/OpenHAB

A docker image to run OpenLDAP, The container default log level is info. Available levels are: none, error, warning, info, debug and trace. To use this container with phpldapadmin, create a custom network that both containers are on and then link them using --link openldap:PHPLDAPADMIN_LDAP_HOSTS in the extra parameters of the phpldapadmin docker container (which should be equal to HOSTNAME in this container). Any other docker that wants to use LDAP credentials will need the same extra parameter including Let's Encrypt if you are using linuxserver.io's ldap-auth container.

Wyoming protocol server for openWakeWord wake word detection system. There is NO WEB-UI to this container.

Enjoy OrcaSlicer directly in your browser with this easy to use Docker container. This template has the minimum variables defined, but you can find additional details on the template at the URLs listed below. https://github.com/helfrichmichael/orcaslicer-novnc https://hub.docker.com/r/mikeah/orcaslicer-novnc

Your Media Server's one-stop shop! HTPC/Homelab services organizer, written in PHP. The new, upgraded official image for Organzir v2.

The OwnTracks Recorder is a lightweight program for storing and accessing location data published via MQTT (or HTTP) by the OwnTracks apps. OTR_PORT is the MQTT port number to connect to. It is set to 1883 by default. Set it to 0 to disable MQTT and run on HTTP only. For this docker container it is suggested to leave both OTR_HTTPHOST and OTR_HOST set to the default "localhost", otherwiser the continer won't be able to start. This container is set to be up and running in HTTP mode (MQTT disabled by default), see https://github.com/owntracks/recorder#configuration-file for the list of optional additional parameters (including those to configure MQTT). Recorder documentation: https://github.com/owntracks/recorder Recorder Docker documentation: https://github.com/owntracks/docker-recorder/

Container for running the OpenZWave MQTT Adapter (for Home Assistant via the new Z-Wave Integration) You will need a running MQTT instance and a z-wave controller in order to use this container. For more information see: https://github.com/OpenZWave/qt-openzwave https://www.home-assistant.io/integrations/ozw/ Or visit the unraid forum support thread for more configuration/info

Monitor an RTSP / MJPEG stream for license plates, record them, store them in SQL, send alerts via MQTT with AutoDiscovery into Home Assistant. REQUIRED: open-alpr-http-wrapper docker container and configuration YAML file (example config on the Plate-Minder Github page

A Discord bot that sends updates about your plex media to a Discord channel using webhooks. Please see the support thread for more details on how to set it up and configure Discord and Plex.

Enjoy Prusaslicer directly in your browser with this easy to use Docker container. This template has the minimum variables defined, but you can find additional details on the template at the URLs listed below. https://github.com/helfrichmichael/prusaslicer-novnc https://hub.docker.com/r/mikeah/prusaslicer-novnc

Integrate your Sony Playstation 5 devices with Home Assistant using MQTT.

Rika2Mqtt is a free and opensource bridge enabling end-users to connect their RIKA firenet stove to an MQTT server. It goes both way so you can monitor and also take control of your stove directly via MQTT.

Interact with Ring Inc products (cameras/alarms/smart lighting) via MQTT - See the project page for token auth procedure - https://github.com/tsightler/ring-mqtt#authentication

Hard Drive S.M.A.R.T Monitoring, Historical Trends and Real World Failure Thresholds

Scrypted Home Automation