Configurable WyzeSense to MQTT Gateway for Home Assistant. Refer to the WyzeSense2MQTT docs for configuration. Change your hidraw port to pass into the container as necessary.
Community Apps
Browse our large and growing catalog of applications to run in your Unraid server.
Xeoma is surveillance software. Connect your cameras and record any detected movement.
Zoneminder is the top Linux video camera security and surveillance solution. ZoneMinder is intended for use in single or multi-camera video security applications, including commercial or home CCTV, theft prevention and child, family member or home monitoring and other domestic care scenarios such as nanny cam installations. It supports capture, analysis, recording, and monitoring of video data coming from one or more video or network cameras attached to a Linux system. ZoneMinder also support web and semi-automatic control of Pan/Tilt/Zoom cameras using a variety of protocols. It is suitable for use as a DIY home video security system and for commercial or professional video security and surveillance. It can also be integrated into a home automation system via X.10 or other protocols. If you're looking for a low cost CCTV system or a more flexible alternative to cheap DVR systems then give ZoneMinder a try. Configuration: Appdata Config Path - This is where the configuration and library files will reside Data Path - This is where events images/videos will reside WebUI Port - Port used to access Zoneminder using ssl security. Change the desired port for access to the Zoneminder WebUI if necessary. The default port of 8443 might not be appropriate for your system. Shared Memory - Turn on the advanced view and adjust the '--shm-size' in the Extra Parameters to half of your installed memory. zmNinja Event Notification Server Port - Port used for zmNinja events to iOS and Android devices. Change the desired port for the zmNinja Event Notification Server if necessary. The default port of 9000 might not be appropriate for your system. Click on "Show Docker Allocations" and confirm you do not have a port conflict with other Docker ports.
zwave-js-ui
Fully configurable Zwave Control Panel and MQTT gateway using NodeJS and Vue Recommended to pass in the USB adapter via the serial/by-id/ - find yours by a terminal command of: ls -l /dev/serial/by-id Example: /dev/serial/by-id/usb-Silicon_Labs_Zooz_ZST10_700_Z-Wave_Stick_a2b44f42d260ec11a6583d7625bfaa52-if00-port0:/dev/zwave
Fully configurable Zwave to MQTT gateway and Control Panel using NodeJS and Vue
Fully configurable Zwave to MQTT Gateway and Control Panel