Community Apps

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local MMX (NOT CHIA) plots. Connects to the main Machinaris application. x86_64 required, MMX does not support aarch64. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

Monero-GUI is a simple but yet powerfull Monero Wallet. ATTENTION: By default your wallet is saved in ../Monero/wallet (please don't store your Wallet in the .../bin directory since it get's deleted after a update is released) I strongly recommend you to backup your keyfile on a regular basis! NOTE: If you minimize the window by accident you have to restart the container to see the GUI again.

Combines a monero node and the monero-dashboard project. The local node will be running on port 18081 (this is what you will connect a local wallet to). If you choose to make this a public node, it will start a service listening on port 18089, which you will need to route to the container.

MyCrypto is an open-source tool that allows you to manage your Ethereum accounts privately and securely. Developed by and for the community since 2015! ATTENTION: Please don't store your keyfile in the .../bin folder since this folder get's deleted if a update from MyCrypto is released, use the Home directory instead! I strongly recommend you to backup your keyfile on a regular basis!

Official .net implementation of the Ethereum protocol.

The fast, light, and robust client for the Ethereum mainnet.

Containerised version of PhoenixMiner. Helps turn your Unraid server into an Ethereum / cryptocurrency mining rig. Contains AMD drivers. Not affected by the AMD reset bug as it doesn't rely on vfio. Works with most Nvidia GPUs as well via Open Source drivers. Check the support link for detailed installation instructions.

Ethereum 2.0 Beacon Chain implementation by Prysmatic Labs.

Rotki is an open source portfolio tracking, analytics, accounting, and tax reporting tool that protects your privacy. The mission of rotki is to bring transparency into the crypto and financial sectors through the use of open source. Most importantly, unlike virtually every other competing service which consists of closed source SaaS onto which you are forced to hand over all your financial data, with rotki your data is stored encrypted locally in your computer. It enables you to take ownership of your financial data!

ScPrime is a cryptocurrency project targeting public cloud services with a blockchain based ecosystem to pay individuals to store data around the globe using smart contracts and cryptographic proofs to ensure accuracy, security and redundancy. Note: This docker container runs the ScPrime Xa-Miner Software (Basic version) used for operating a storage provider. Setup: Command-line is required to configure your storage provider instance. Open the Unraid terminal and enter: docker exec -it scprime sh Getting Started: https://docs.scpri.me/diy-getting-started Storage Network Status: https://scpri.me/network Join the Discord for Help (Recommended): https://discord.gg/scprime Support can be found in Discord: #support-diy

Docker image of the Spacemesh cryptocurrency built from the code found at https://github.com/spacemeshos/go-spacemesh/. NOTE: It is HIGHLY RECOMMENDED that a proper configuration is provided and stored in the node-data path below. This image provides node-only services.

This is official Storj V3 node client. To participate you must first have to have an authorization token, to get the Authentication Token go to: https://storj.io/sign-up-farmer This template is for running the Docker application only, please follow Storj Lab directions to generate your Node Identity files - this is in https://documentation.storj.io/dependencies/identity !!! IMPORTANT Two path need to be passed to the docker. Currently Storj requires that the path are mounted using --mount rather than -v. Please add the path for the storage and identity folders to the extra parameters in the following format (extra parameters can be accessed through the advanced view toggle): --mount type=bind,source="/mnt/user/appdata//storj/identity/storagenode/",destination=/app/identity --mount type=bind,source="/mnt/user//",destination=/app/config During the first run the -e SETUP=true argument needs to be added to this string to create the required folders. After the first run when container is created restart it and delete the -e SETUP=true argument. For additional information please visit the support thread: https://forums.unraid.net/topic/88430-support-storj-v3-docker

A tool for ScPrime Storage Providers to set an arbitrary price and have the price auto-adjust an amount around that price. It also provides auto-reannouncement of the host address when IP address changes. Note: The setup instructions below will work with an ScPrime docker container named scprime (case sensitive) using the default SPD Hosting Port 4282. Other configurations will require editing Post Arguments (edit this template in Advanced View): https://docs.scpri.me/storageproviderindex/linux-supervisor-lite-installation-guide Pre-Installation Setup: Create a custom (user-defined) docker network, ex. scprime: Open the Unraid terminal and enter: docker network create scprime Edit your ScPrime Xa-Miner (Basic version) container template: Under Network Type, choose custom : scprime Create an API Password (you'll need this later) Apply changes to the ScPrime container template Setup Supervisor-Lite: Edit this Supervisor-Lite container template: Under Network Type, choose custom : scprime Enter in the API Password from the ScPrime container template Apply changes to the Supervisor-Lite template Join the Discord for Help (Recommended): https://discord.gg/scprime Support can be found in Discord: #support-diy

T-Rex is a versatile cryptocurrency mining software. It supports a variety of algorithms and we, as developers, are trying to do our best to make it as fast and as convenient to use as possible. Requires nvidia-driver plugin (6.9+)

Urbit is a clean-slate OS and network for the 21st century. Self-host your computer, identity and access to the urbit world.

Quickly find out the SAT rate for podcasts in cryptocurrency.

Full node of the Witnet Oracle. The decentralized oracle that is true to the censorship resistant nature of blockchains. Without a reliable oracle, smart contracts can be vulnerable to hacks, corruption and monetary loss. Witnet leverages state-of-the-art cryptographic and economic techniques to provide your smart contracts with secure data input. Without a reliable oracle, smart contracts can be vulnerable to hacks, corruption and monetary loss. To let other nodes in the network find your node, ensure port 21337 is forwarded from your router to the P2P port set below. The node is open-source, in case you want to verify the code, just go to the repository: https://github.com/witnet/witnet-rust For further reading, head youself to the docs, qhere you will find information for newbies, developes, node operators and a developers reference to help to integrate it in your project: https://docs.witnet.io/