Community Apps

NVTOP stands for Neat Videocard TOP, a (h)top like task monitor for AMD, Intel and NVIDIA GPUs. It can handle multiple GPUs and print information about them in a htop familiar way. This Plugin is based on: https://github.com/Syllo/nvtop

nwipe is a program that will securely erase the entire contents of disks, with a ncurses GUI. It can help you make sure that your precious data is gone for good, before you sell or RMA your disks. nwipe is a fork of the dwipe command originally used by Darik's Boot and Nuke (DBAN).

This plugin shows any open files on the array that might prevent a clean shutdown. The plugin web page is installed in 'Tools'. You can stop all array processes on the open files web page and troubleshoot shutdown problems. After you stop all array processes, you will see what processes are still holding files open on the array preventing a shutdown.

This package contains and installs the OpenRGB Patch that needs to be installed in conjunction with the OpenRGB Docker container to take full controll over your RGB lighting. To see all the RGB devices you have to pass through the devices /sys/bus/i2c/device and /dev/i2c-0 to the OpenRGB Docker container and maybe all other /dev/i2c-X devices (where you have to replace X with the number from the device to pass through).

Fine-tune the execution of long-running array opperations such as Parity Check, Parity-Sync/Data Rebuid and Disk Clear so that they are automatically run in increments at convenient times rather than having to run to completion uninterrupted. Also allows for such operations to be automatically paused (and later resumed) if disk temperatures exceed specified thresholds.

Is a slim plugin, that takes informations gathered form the MSI Afterburner Remote Server API and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. This plugin requires the MSI Afterburner Remote Server on the machine that you want to watch, please configure the IP address of your local MSI Afterburner Remote Server on the Settings page from the plugin! Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9091/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9091' to your Prometheus yaml). This Plugin is based on: https://github.com/kennedyoliveira/prometheus-msi-afterburner-exporter

Is a slim plugin, that takes informations gathered from nvidia-smi and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9202/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9202' to your Prometheus yaml). This Plugin is based on: https://github.com/e7d/docker-prometheus-nvidiasmi

Is a slim plugin, that takes informations gathered from your Fritzbox and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9042/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9042' to your Prometheus yaml). This Plugin is based on fritzbox-exporter from sberk42: https://github.com/sberk42/fritzbox_exporter

Is a slim plugin, that takes informations gathered form your unRAID system and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9100/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9100' to your Prometheus yaml). This Plugin is based on node_exporter: https://github.com/prometheus/node_exporter

Is a slim plugin, that takes informations gathered from the Pi-Hole API and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9617/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9617' to your Prometheus yaml). This Plugin is based on pihole-exporter from eko: https://github.com/eko/pihole-exporter

This plugin takes informations gathered from the wireguard API and provides it to a Prometheus database. Usage is not limited to Prometheus only. Data can be formated and displayed to any database or graphical node. Export URL: The URL for the exportet metrics is: 'http://YOURunRAIDIP:9586/metrics' (to use it in Prometheus add the target: 'YOURunRAIDIP:9586' to your Prometheus yaml). This Plugin is based on prometheus_wireguard_exporter from MindFlavor: https://github.com/MindFlavor/prometheus_wireguard_exporter

Installs python3, pip and setuptools onto Unraid systems. No library issues, fully compatible with Unraid 6 and 7.

This package contains and installs the QNAP Embedded Controller chip Kernel module, this allows you to read fan speeds and temperatures as well as reading and writing the fan PWM values from the ITE Tech Inc. IT8528 embedded controller chip. Currently known supported units are: TS-473A, TS-673A, TS-873A, TS-h886, TS-453Be, TS-877, TS-1677x, TS-253B, TS-453A, TS-464 Source: https://github.com/Stonyx/QNAP-EC

This plugin adds the tool 'radeontop' to your unRAID server and also enables your AMD GPU from the installation of this plugin on, so no editis to the 'go' file or creation of other files are necessary (please not that this plugin only enables the 'amdgpu' Kernel module and not the 'radeon' Kernel module). To see the usage of your GPU open up the unRAID Terminal and type in 'radeontop' (without quotes). This plugin satisfies installation prerequisites of the GPU Statistics plugin from Community Apps. With both plugins installed you can display AMD GPU utilization on the unRAID Dashboard.

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). The following Chipsets are supported by this driver: Network Interface Controllers > 2.5G Gigabit Ethernet > PCI Express RTL8125 / RTL8125B(S)(G) Source: https://github.com/jinlife/unraid-r8125-r8152-driver

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). The following Chipsets are supported by this driver: Network Interface Controllers > 5G Gigabit Ethernet > PCI Express RTL8126 Source: https://github.com/jinlife/unraid-r8125-r8152-driver

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). ATTENTION: To utilize 2.5Gbit/s speeds you have to add this line at the bottom to your 'go' file: 'ethtool -s eth0 autoneg on advertise 0x80000000002f' (without quotes and modify eth0 to the corresponding adapter in your system)! To utilize 5Gbit/s speeds you have to add this line at the bottom to your 'go' file: 'ethtool -s eth0 autoneg on advertise 0x180000000002f' The following Chipsets are supported by this driver: Network Interface Controllers > 5G Gigabit Ethernet > USB 3.0 RTL8157 Network Interface Controllers > 2.5G Gigabit Ethernet > USB 3.0 RTL8156 / RTL8156B Network Interface Controllers > 10/100/1000M Gigabit Ethernet > USB 3.0 RTL8153 / RTL8153B / RTL8153C / RTL8153D / RTL8153E Network Interface Controllers > 10/100/1000M Gigabit Ethernet > USB 2.0 RTL8154 / RTL8154B Network Interface Controllers > 10/100M Fast Ethernet > USB 2.0 RTL8152B Source: https://github.com/jinlife/unraid-r8125-r8152-driver

This package contains the Realtek OOT Drivers and installs them, a reboot is required after installing the plugin (upgrading to a newer Unraid version maybe needs a second reboot too). The following Chipsets are supported by this driver: Network Interface Controllers > 10/100/1000M Gigabit Ethernet > PCI Express RTL8111B/RTL8111C/RTL8111D/RTL8111E/RTL8111F/RTL8111G(S)/RTL8111H(S)//RTL8118(A)(S)/RTL8119i/RTL8111L/RTL8111K RTL8168B/RTL8168E/RTL8168H RTL8111DP/RTL8111EP/RTL8111FP RTL8411/RTL8411B Source: https://github.com/jinlife/unraid-r8125-r8152-driver

Sanoid is a policy-driven snapshot management tool for ZFS filesystems. When combined with the Linux KVM hypervisor, you can use it to make your systems functionally immortal.

Spin down idle SAS drives the same way SATA drives are spun down. If you have SAS spinning drives in your array, you may have noticed that Unraid, while asserting that they have been spun down, does not in fact spin them down (true at least up until version 6.8.3). This plugin attempts to ensure that SAS drives spin down and up in sync with Unraid schedule (i.e. same as SATA drives).

A plugin for advanced users installing SnapRAID onto UNRAID systems, now with support for multiple arrays.

This Plugin will install the Sundtek DVB Drivers to Unraid. Please visit the Plugin page after installing the plugin to configure your TVHeadend instance for use with this plugin.

This plugin enables creation/starting/stopping/changing of a Swap File on your unRAID server. The plugin allows placing swapfiles on a BTRFS formatted drive.

Taglib is a simple custom label manager

Theme Engine lets you re-style the unRAID webGui. Instead of creating a whole new theme, it adjusts settings that override the theme you are already using. You can adjust as few or as many settings as you like. Mixing and matching the base themes with Theme Engine settings creates endless possibilities. Import one of the included styles, or remix and export your own.

Tips and Tweaks gives you tips on issues in certain versions of Unraid and lets you make some adjustments to Ethernet NIC(s), disk cache settings, and CPU scaling governors that can potentially help with performance and latency issues.

How did that terminal command work again? TLDR presents the most common use cases for a command right inside your terminal, so you spend less time researching command arguments and more time actually getting things done.

Leave terminals and come back at any later time. Manage and create persistent terminal sessions in the Unraid Web GUI. (Installs Tmux - if not already installed)

This package contains the UGREEN LED Driver which will allow you to get your LEDs to work on your UGREEN NAS (please note that not all models are supported). The plugin is based on: https://github.com/miskcoo/ugreen_dx4600_leds_controller

This Plugin adds uinput to unRAID.