Community Apps

This docker container provides a caching proxy server for game download content. For any network with more than one PC gamer in connected this will drastically reduce internet bandwidth consumption.

This docker container provides DNS entries for caching services to be used in conjunction with a container. The DNS is generated automatically at startup of the container

This container will download and install BattleNetPrefill and/or EpicPrefill and/or SteamPrefill and run the prefill on a cron schedule. Network: It is recommended to run this container in the same network mode as the LANCache-DNS if used, by default it is set to br0 please change that if you have your LANCache server configured to work network wide on your LAN to the correct network type for your configuration. DNS: I would strongly recommend that you set the DNS manually to the LANCache-DNS if you haven't it configured to be network wide on your LAN, to do that turn on the advanced view (toggle switch in the top right corner) and at the extra parameters append: --dns=yourLANcacheSERVER (of course replace 'yourLANcacheSERVER' with the address of your LANCache-DNS). Update Notice: The container will check by default on each start/restart on new updates for BattleNetPrefill and/or EpicPrefill and/or SteamPrefill, this can be disabled if really wanted. BattleNet|Epic|Steam Prefill Notice: Steam Prefill needs to be configured to work properly, please enter the following commands and/or follow the prompts afterwards, you can close the window when you are finished: 1. Open up a container console 2. Type in 'su ${USER}' and press ENTER 3. Type in 'cd ${DATA_DIR}/(BattleNet|Epic|Steam)Prefill' and press ENTER 4. Type in './(BattleNet|Epic|Steam)Prefill select-apps' and press ENTER 5. Type in './(BattleNet|Epic|Steam)Prefill select-apps' and press ENTER 6. Enter your credentials and/or follow the steps displayed 7. Select the apps you want to prefill and press ENTER 8. Done Notice: In the above example you have to choose between BattleNet, Epic or Steam so that it says BattleNetPrefill, EpicPrefill or SteamPrefill instead of (BattleNet|Epic|Steam)Prefill. (these stepps are also displayed in the container log when BatteNet/Epic/Steam isn't/aren't configured yet) If you ever want to change the apps you've selected then follow these steps again.

LanguageTool is an Open Source proofreading software for English, French, German, Polish, Russian, and more than 20 other languages. It finds many errors that a simple spell checker cannot detect. LanguageTool can make use of large n-gram data sets to detect errors with words that are often confused. To add the ngram data to the docker, download the languages you want from here: https://languagetool.org/download/ngram-data/, move it to your server and link the location in the container path /ngrams. By default, this is set to the appdata folder. More information on ngram data can be found here: https://dev.languagetool.org/finding-errors-using-n-gram-data

Web application for archival and reading of manga/doujinshi. Lightweight and Docker-ready for NAS/servers. * If you encounter an error while uploading files, please make sure the content folder has write permissions *

This Docker will download and install SteamCMD. It will also install Last Oasis and run it. Customer & Provider Key: You have to first create your own Provider Key here: https://myrealm.lastoasis.gg and fill in the generated Provider Key and Custom Key in the template. After the first server start: After the first sever start you can mange your server at: https://myrealm.lastoasis.gg you should see your server there. Create a Realm, Add and Activate a Tile and wait for the server to load it, after that you can join your dedicated server (keep in mind that every Tile needs it's own dedicated server and each dedicated server needs it's own Provider Key!). ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

Source: https://github.com/freyacodes/Lavalink Before you Deploy please create folder Names "Lavalink" /mnt/user/appdata/Lavalink/application.yml and upload application.yml to folder

Lazylibrarian(https://lazylibrarian.gitlab.io/) is a program to follow authors and grab metadata for all your digital reading needs. It uses a combination of Goodreads Librarything and optionally GoogleBooks as sources for author info and book info. This container is based on the DobyTang fork.

LazyLibrarian is a program to follow authors and grab metadata for all your digital reading needs. Calibre is a free and open source e-book library management application developed by users of e-books for users of e-books.

Secure, Automated, and Multi-Cloud Bitwarden Backup and Import System

Install for LCDd and lcdproc to support LCD Screens. A QNAP lcd device is icp_a106, Futher panels will be added in the future along with unRAID specific screens.

Ldap-auth(https://github.com/nginxinc/nginx-ldap-auth) software is for authenticating users who request protected resources from servers proxied by nginx. It includes a daemon (ldap-auth) that communicates with an authentication server, and a webserver daemon that generates an authentication cookie based on the user’s credentials. The daemons are written in Python for use with a Lightweight Directory Access Protocol (LDAP) authentication server (OpenLDAP or Microsoft Windows Active Directory 2003 and 2012).

An LDAP server that uses Plex as the provider.

Leantime is an open source project management system for small teams and startups.

This Docker will download and install SteamCMD. It will also install Left4Dead and run it. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install SteamCMD. It will also install Left4Dead 2 and run it. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

FTB Legend of the Eyes Modded Minecraft ServerFTB Legend of the EyesTwelve eyes, scattered around the world. When brought together, they create a portal to unspeakable danger and adventure. Version tags available: - 1.9.0 - 1.8.0 - 1.7.0 - 1.6.0 - 1.5.0 - 1.4.0 - 1.3.1 - 1.3.0 - 1.2.0Setup:You must accept the EULA by setting the EULA variable to true or the install will fail.Optional:You can setup a comma separated list of players who will have admin privileges in game by setting OPS

Lemur manages TLS certificate creation. While not able to issue certificates itself, Lemur acts as a broker between CAs and environments providing a central portal for developers to issue TLS certificates with 'sane' defaults. CFSSL is CloudFlare's PKI/TLS swiss army knife. It is both a command line tool and an HTTP API server for signing, verifying, and bundling TLS certificates.

Mirrors and removes files from a remote lftp folder to a local folder.

Liberate your Library. An Audible audiobook downloader.

LibreChat brings together the future of assistant AIs with the revolutionary technology of OpenAI's ChatGPT. Celebrating the original styling, LibreChat gives you the ability to integrate multiple AI models. It also integrates and enhances original client features such as conversation and message search, prompt templates and plugins. https://docs.librechat.ai/

a fully featured network monitoring system that provides a wealth of features and device support. Database must be CHARACTER SET utf8 COLLATE utf8_unicode_ci For Poller to work please follow https://forums.unraid.net/topic/89502-support-a75g-repo/?do=findComment&comment=1318785

LibreOffice(https://www.libreoffice.org/) is a free and powerful office suite, and a successor to OpenOffice.org (commonly known as OpenOffice). Its clean interface and feature-rich tools help you unleash your creativity and enhance your productivity.

Free and Open Source Machine Translation API, entirely self-hosted. First start takes a while as models are being downloaded. Warning: This container is very big, expect about 12GB of Docker image usage.

LibreWolf(https://librewolf.net/) is a custom and independent version of Firefox, with the primary goals of privacy, security and user freedom. LibreWolf also aims to remove all the telemetry, data collection and annoyances, as well as disabling anti-freedom features like DRM.

A framework- and JavaScript-free privacy respecting meta search engine, giving you results from Google, Qwant, Ahmia and popular torrent sites without spying on you.

A fork of LibreX, a framework- and JavaScript-free privacy respecting meta search engine, giving you results from Google, Qwant, Ahmia and popular torrent sites without spying on you. LibreY changed some features like automatic redirection. See documentation for all available settings: https://github.com/Ahwxorg/LibreY/tree/main/docker#environment-variables-that-can-be-set-in-the-docker-container

A Plugin for Hot-plugging USB Devices to Running VMs. Libvirt Hotplug USB allows mounting of USB Devices (e.g. Keyboard, Mouse, iPhone, FlashDrive, etc) on running VMs. It uses virsh to attach the Devices which avoids Conflicts between different VMs.

WireGuard VPN, Privoxy and Unbound built-in! For audiophiles only!

Lidarr is a music collection manager for Usenet and BitTorrent users. It can monitor multiple RSS feeds for new tracks from your favorite artists and will grab, sort and rename them. UPDATE: The container will check on every start/restart if there is a newer version available (you can also choose between stabel and nightly version - keep in mind that switching from a stable to a nightly version and vice versa can break the container). MANUAL VERSION: You can also set a version manually by typing in the version number that you want to use for example: '0.7.0.1347' (without quotes) - you can also change it to 'latest' or 'nightly' like described above. ATTENTION: Don't change the port in the Lidarr config itself. MIGRATION: If you are migrating from another Container please be sure to deltete the files/folders 'logs' and 'config.xml', don't forget to change the root folder for your music and select 'No, I'll Move the Files Myself'! WARNING: The main configuration of the paths has a performance and disk usage impact: slow, I/O intensive moves and wasted disk space. For a detailed guide to change that see https://trash-guides.info/hardlinks/#unraid .