Community Apps

A free, open source server hosting tool for Minecraft and other multiplayer games After first boot Unraid CLI chmod 777 -R /mnt/user/appdata/lodestone/ Then download the client from https://github.com/Lodestone-Team/lodestone/releases Copy the Secert key from the docker log and login Please note that for any Game server port add new port for it

A fully automated, accurate, and extensive scanner for finding vulnerable log4j hosts To Use After install you will see this container in the docker tab but will apear as not started and seem not to start and the log will show an error. You must add a url list before running to get a result. The container will have made a folder in the appdata folder. You will need to reset its permissions run the line below from the Unraid terminal chmod -R u-x,go-rwx,go+u,ugo+X /mnt/user/appdata/log4j-scan/ then put a file called urls.txt with each url on a separate line in that location then run the below command After run the container and view the log to see the result post arguments in the template optional arguments can be added to the post arguements (see https://github.com/fullhunt/log4j-scan) -h, --help show this help message and exit -u URL, --url URL Check a single URL. -p PROXY, --proxy PROXY send requests through proxy -l USEDLIST, --list USEDLIST Check a list of URLs. --request-type REQUEST_TYPE Request Type: (get, post) - . --headers-file HEADERS_FILE Headers fuzzing list - . --run-all-tests Run all available tests on each URL. --exclude-user-agent-fuzzing Exclude User-Agent header from fuzzing - useful to bypass weak checks on User-Agents. --wait-time WAIT_TIME Wait time after all URLs are processed (in seconds) - . --waf-bypass Extend scans with WAF bypass payloads. --custom-waf-bypass-payload CUSTOM_WAF_BYPASS_PAYLOAD Test with custom WAF bypass payload. --test-CVE-2021-45046 Test using payloads for CVE-2021-45046 (detection payloads). --dns-callback-provider DNS_CALLBACK_PROVIDER DNS Callback provider (Options: dnslog.cn, interact.sh) - . --custom-dns-callback-host CUSTOM_DNS_CALLBACK_HOST Custom DNS Callback Host. --disable-http-redirects Disable HTTP redirects. Note: HTTP redirects are useful as it allows the payloads to have a higher chance of reaching vulnerable systems.

Logitech Media Server (formerly SlimServer, SqueezeCenter and Squeezebox Server) is a streaming audio server supported by Logitech (formerly Slim Devices), developed in particular to support their Squeezebox range of digital audio receivers. Configuration: /config - this path is used to store the configuration and the database files of Logitech Media Server. /music - set this path to where you store your music files.

Logitech Media Server is a streaming audio server supported by Logitech, developed in particular to support their Squeezebox range of digital audio receivers.

Lollypop(https://wiki.gnome.org/Apps/Lollypop) is a lightweight modern music player designed to work excellently on the GNOME desktop environment.

Lomorage enables you to backup photos / videos from any devices to your self-hosted server, and intelligently manages these personal assets via AI. Run the Lomorage server at your home, download mobile client to save the memories, and enjoy the moments.

This Docker will download and install SteamCMD. It will also install Longvinter and run it. Initial Server Name: Longvinter Docker Initial Password: Docker ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This plugin adds support for LTFS. You can easily mount tape drives in Unraid.

A self-hosted, open-source vehicle service records and maintainence tracker.

LuckyBackup is a very user-friendly GUI backup program. It uses rsync as a backend and transfers over only changes made rather than all data. Update: The container will check on every start/restart if there is a newer version available Cron: If you create a cron job please be sure to tick the "Console Mode" checkbox, otherwise the cron jobs will not work. Language: If you want to change the language make sure to exit luckyBackup from within the WebGUI by clicking 'Profile -> Quit' or CTRL +X otherwise the language change isn't saved.

LXC is a well-known Linux container runtime that consists of tools, templates, and library and language bindings. It's pretty low level, very flexible and covers just about every containment feature supported by the upstream kernel. ATTENTION: This plugin is currently in development and currently meant for advanced users only, please visit the support thread first! Not all features/distributions are supported currently!

Lychee(https://lycheeorg.github.io/) is a free photo-management tool, which runs on your server or web-space. Installing is a matter of seconds. Upload, manage and share photos like from a native application. Lychee comes with everything you need and all your photos are stored securely."

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, providing the Chia fullnode, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chives (NOT CHIA) plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Gigahorse plots. Connects to the main Machinaris application. x86_64 required, Gigahorse does not support aarch64. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

On a secondary Unraid system, allows for harvesting of local Chia plots. Connects to the main Machinaris application. PREREQUISITE: On another machine! Install the Machinaris application, which this harvester container will connect with. WARNING: Do NOT install this harvester on the same system as you installed the fullnode. The fullnode already runs a harvester internally. This harvester software is for a second physical server. INSTALL: Set the host path to first directory containing plots using '/plots1' Path. Add more Paths for additional host directories. Also be sure to set the LAN IP address of your Unraid server in the controller_host, farmer_address and worker_address variables. SETUP: Control of this harvester will be available within the Machinaris WebUI. SUPPORT: Join the Discord server for fastest response: https://discord.gg/mX4AtMTt87 Ask a question or start a discussion on Github: https://github.com/guydavis/machinaris/discussions DISCLAIMER OF WARRANTY. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.