Community Apps

This plugin enables creation/starting/stopping/changing of a Swap File on your unRAID server. The plugin allows placing swapfiles on a BTRFS formatted drive.

Admin UI for Matrix Synapse homeserver. User must be admin user - how to make admin user "register_new_matrix_user -c /data/homeserver.yaml http://0.0.0.0:8008"

Synclounge(https://github.com/samcm/synclounge) is a third party tool that allows you to watch Plex in sync with your friends/family, wherever you are.

Syncthing(https://syncthing.net) replaces proprietary sync and cloud services with something open, trustworthy and decentralized. Your data is your data alone and you deserve to choose where it is stored, if it is shared with some third party and how it's transmitted over the Internet.

TailVault is a secure and lightweight container designed for Unraid 7 and above, enabling friends to share a dedicated backup location over Tailscale. TailVault provides an SFTP destination, allowing a friend to back up their data directly to your server both securely and privately. Features Friend-Specific Backup Access - TailVault restricts access so your friend can only back up to the designated directory on your server. They cannot access any other part of your system. Tailscale Integration - Backups are conducted over Tailscale, so Tailscale must be installed in this container using Unraid’s built-in Tailscale Docker integration. This ensures end-to-end encryption and secure networking without the need for additional VPNs or firewall changes. Use Cases 1. Backups Using Backup Software Configure backup software (e.g., Duplicati) on your friend’s server to send backups over Tailscale to TailVault. These backups are encrypted before being sent, ensuring complete privacy. 2. Rsync Jobs Use TailVault as a destination for rsync jobs or other backup tools from another Unraid server or device in the same Tailnet. How to Configure the Template 1. Enable Tailscale Enable Tailscale in the container and connect it to your Tailnet. In the Tailscale admin console, share the container with your friend to whom you want to allow to backup to your server. 2. Set TailVault Backups Directory Configure this to the location where your friend will store their backups. This directory should be empty and not contain any existing data. 3. Set User Credentials SFTP_USER Choose a username to share with your friend. SFTP_PASS Set a password to share with your friend. Notes If using backup software on the sending server (e.g., Duplicati), it is recommended to set the networking type of the sending container to host. This helps ensure a direct connection over Tailscale and reduces the likelihood of relying on a relay (DERP) server. TailVault itself can remain in bridge mode.

A free and open source alternative project management tool. Please note that this project is still in active development. Some options may not work yet! Setup: Please install Postgresql first and then fill in the conncetion details below

TasmoCompiler is a simple web GUI which allows you to compile fantastic Tasmota firmware with your own settings IMPORTANT NOTE You have to remember that all compilation is performed on Gitpod servers, so you have to decide if you want to put sensitive data like Wifi/MQTT credentials to Gitpod hands.

Tauticord is a Discord bot that displays live data from Tautulli, including stream summaries, bandwidth and library statistics.

Tautulli(http://tautulli.com) is a python based web application for monitoring, analytics and notifications for Plex Media Server.

This is the official container supported by the Tautulli devs. Tautulli is a 3rd party application that you can run alongside your Plex Media Server to monitor activity and track various statistics.

tautuilli-notification-digest (TND) acts a middleman between Discord and Tautulli for notifying you about recently added media to your plex server. It collects all of the Recently Added notifications Tautulli would send to a Discord notification agent throughout the day and then compiles them all into **one** notification that is sent on a schedule you configure. It reduces multiple, noisy notifications for active plex server into one digestable message sent once a day. You will need to make changes to Tautulli before TND is usable on unraid. Refer to the Support Thread or use the Quick Start guide in the project README to get started.

A collection of PowerShell scripts that collect information from Tautulli's API and sends it off to Discord via webhooks.

TeamCity Server - Powerful Continuous Integration and Continuous Delivery out of the box This is an official JetBrains TeamCity server image. The image is suitable for production use and evaluation purposes.

Teledock: A simple telegram bot that allows a telegram's user to control a docker service.

Telegraf gathers metrics from your system and sends them to an InfluxDB server for storage. From InfluxDB you would typically use something like Grafana to plot the data. Both Grafana and Influxdb are available through Community Apps This version of telegraf requires you to manually place a config file at /mnt/user/appdata/telegraf/telegraf.conf The container will not start without it. The default telegraf.conf file can be extracted from telegraf by running this command before you launch telegraf docker run --rm telegraf telegraf config > /mnt/cache/appdata/telegraf/telegraf.conf Configuration Container Volumes: /var/run/docker.sock Read Only. Location of your docker socket. /var/run/utmp Read Only. Location of your utmp file. /run/udev Read Only. Allows you to identify devices based on their properties, like vendor ID and device ID /rootfs Read Only. To be mapped to the root of the host file system. This is so the disk usage reported will be that of the host system. /rootfs/etc Read Only. To be mapped to the etc of the host file system. This is so the disk usage reported will be that of the host system. /rootfs/proc Read Only. To be mapped to the proc of the host file system. This is so the disk usage reported will be that of the host system. /rootfs/sys Read Only. To be mapped to the sys of the host file system. This is so the disk usage reported will be that of the host system. Environment Variables: HOST_MOUNT_PREFIX Name of container volume mapping of the root file system. HOST_ETC Name of the etc volume mapping of the root file system. HOST_PROC Name of the proc volume mapping of the root file system. HOST_SYS Name of the sys volume mapping of the root file sytem.

Simple prometheus exporter for Linky teleinfo

This is a 100% inline bot, you can't talk directly to him, you need to add your bot to your telegram and in any chat you type this: @BOT_NAME NAME_OF_THE_MOVIE And this will show you 5 movies that you can download click on the and will send the name and the image of the movie on a message so you can send to a friend or in my case my wife.

This is a simple web controller for the Tenda SP9 smart plug. ROUTER_IP (env variable) to force your router ip if not 192.168.1.1 Serve at port 80. JSON file is located at /config/, add this to a volume to see it outside of the image. The first run may take around 10 seconds (more if you don't have a decent CPU or local network). Because the application fetchs all Tenda SP9 devices over the local network.

Termix is an open-source forever free self-hosted SSH (other protocols planned, see Planned Features) server management panel inspired by Nexterm. Its purpose is to provide an all-in-one docker-hosted web solution to manage your servers in one easy place. I'm using this project to help me learn React, Vite, and Docker but also because I could never settle on a server management software that I enjoyed to use. Warning This app is in the VERY early stages of development. Expect bugs, data loss, and unexplainable issues! For that reason, I recommend you securely tunnel your connection to Termix through a VPN.

Self-host a Terraform backend and state files

Terrateam is an open-source GitOps CI/CD platform for automating infrastructure workflows. It integrates with GitHub to orchestrate Terraform, OpenTofu, CDKTF, Terragrunt, and Pulumi operations via pull requests. This container is used to build the configuration needed to set up Terrateam.

A Docker version of BobStrogg's TeslaCam Browser. Simply add the path to your TeslaCam videos and access the WebUI. GitHub repository located at https://github.com/BobStrogg/teslacam-browser

TeslaMate is a powerful, self-hosted data logger for your Tesla. Postgres is required to save logged data.

Sync TeslaMate data to A Better Route Planner to avoid issues with your Tesla sleeping

A simple SMS gateway that allows users to send SMS messages from a web interface or from their application via a REST API. It utilizes android phones as SMS gateways.

A simple SMS gateway that allows users to send SMS messages from a web interface or from their application via a REST API. It utilizes android phones as SMS gateways.

Local, web-based note-taking app inspired by "One Big Text File" idea.

TGraph Bot is a bot for posting Tautulli graphs to a Discord channel.

TheLonge is the self-hosted web IRC client. Modern features brought to IRC, Always connected, Responsive interface, Synchronized experience The Lounge is the official and community-managed fork of Shout, by Mattias Erming. Multiple Users: If you want to create a new user simply change the name in the 'Username' variable and also the 'Password' variable, this will have no impact to existing users (the 'Username' variable can't be empty and should always have a username in it that is available on the server).

theme.park contains 50 themed applications, with css addons on certain themes. Installation methods include custom docker mods for linuxserver.io containers, custom scripts for select Hotio containers and multiple examples of subfiltering using webservers like Nginx and Apache Choose between 10 official styles, and 22 community styles! With the possibility to easily create your own themes using the defined variables. See https://theme-park.dev/ and https://docs.theme-park.dev/setup/#docker for more information