Community Apps

This Docker will download and install SteamCMD. It will also install RUST and run it. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

Self-host your own RustDesk Server, it is free and open source. This container includes both the RustDesk Server and the RustDesk Relay in one and starts it.

SABnzbd is a program to download binary files from Usenet servers. Many people upload all sorts of interesting material to Usenet and you need a special program to get this material with the least effort. UPDATE: The container will check on every start/restart if there is a newer version available (you can also choose between stabel and prereleases and switch between them - keep in mind sometimes downgrading from a prerelease version could break your configuration). MANUAL VERSION: You can also set a version manually by typing in the version number that you want to use for example: '3.0.1' (without quotes) - you can also change it to 'latest' or 'prerelease' like described above. ATTENTION: Don't change the IP adress or the port in the SABnzbd config itself - please also note if you change the WebGUI port from 8080 to anything else that it can happen that you have close and reopen the webpage since SABnzbd want's to redirect you to the wrong port after the initial setup.

This Docker will download and install SteamCMD. It will also install Satisfactory and run it. SETTINGS: The first player that connects to the server becomes administrator, edit the server settings and can create a game. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install SteamCMD. It will also install SCP:Secret Laboratory with MultiAdmin and ServerMod and run it. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory! CONSOLE: To connect to the console open up a terminal and type in: 'docker exec -u steam -ti NAMEOFYOURCONTAINER screen -xS SCP' (without quotes), to disconnect from the console simply close the window.

Sonarr is a PVR for Usenet and BitTorrent users. It can monitor multiple RSS feeds for new episodes of your favorite shows and will grab, sort and rename them. It can also be configured to automatically upgrade the quality of files already downloaded when a better quality format becomes available. UPDATE: The container will check on every start/restart if there is a newer version available (you can also choose between stabel and nightly version - keep in mind that switching from a stable to a nightly version and vice versa can break the container). MANUAL VERSION: You can also set a version manually by typing in the version number that you want to use for example: '2.0.0.5250' (without quotes) - you can also change it to 'latest' or 'nightly' like described above. ATTENTION: Don't change the port in the Sonarr config itself. MIGRATION: If you are migrating from another Container please be sure to deltete the files/folders 'logs', 'xdg' and 'config.xml', don't forget to change the root folder for your tv shows and select 'No, I'll Move the Files Myself'! WARNING: The main configuration of the paths has a performance and disk usage impact: slow, I/O intensive moves and wasted disk space. For a detailed guide to change that see https://trash-guides.info/hardlinks/#unraid .

This Docker will download and install SteamCMD. It will also install Sons Of The Forest and run it. SERVERNAME: 'Sons Of The Forest Docker Server' SERVERPASSWORD: 'Docker' (you can change this in your SERVERFOLDER/userdata/dedicatedserver.cfg) BETA Warning: Since this Docker runs with WINE it's marked as BETA, i can not guarantee if the server is running always as expected! ATTENTION: First Startup can take very long since it downloads the gameserver files! WARNING: You have to open the ports in your firewall as listed in this template, if not the server will not properly start. If you want LAN play only you have to edit the dedicatedserver.cfg file and set the "LanOnly" flag to: "true" (without double quotes). Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install SteamCMD. It will also install Soulmask and run it. Defaults: Servername: 'Soulmask Docker' Password: 'Docker' Admin Password: 'adminDocker' (You can change that in the GAME_PARAMS variable) ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install SteamCMD. It will also install Squad and run it. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install SteamCMD. It will also install Starbound (Valid Steam useraccount with the game purchased and Steam Guard disabled required) and run it. ATTENTION: For this Docker you have to specify a valid Steam account with Steam Guard disabled and the game in the library otherwise the gamefiles won't download! First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This container will download and install a StarMade Dedicated Server. It will also install a basic server.cfg at the first startup. UPDATE: The container will check on every restart if there is a newer version of StarMade available.

This Docker will download and install SteamCMD. It will also install Stationeers and run it. Configuration: To configure your server edit the file 'settings.xml' which lives in the main directory from the container (please don't forget to stop the container before editing the file). ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This is a Basic STUN & TURN server that was mainly created for Nextcloud Talk. It is fully automated and will create all the necessary files and passwords so that the server can sucessfully start and run. Please read all the discriptions from the Variables carefully and also look at the 'Show more settings' tab. ATTENTION: Please ignore the socket errors after the server startup if you don't have IPv6 enabled on your server.

This Docker will download and install SteamCMD. It will also install Subsistence and run it. ATTENTION: First startup can take very long since it downloads the gameserver files and also installs dotnet45! First Start Notice: On First startup the container installs dotnet45 and it might seem that the container hangs but please be patient since the installation can take very long on some systems (5 minutes+). Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Plugin will install the Sundtek DVB Drivers to Unraid. Please visit the Plugin page after installing the plugin to configure your TVHeadend instance for use with this plugin.

This Docker will download and install SteamCMD. It will also install Survive The Nights and run it. ATTENTION: First Startup can take very long since it downloads the gameserver files! INITIAL SERVER PASSWORD: Docker Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install SteamCMD. It will also install Sven CO-OP and run it. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install SteamCMD. It will also install TeamFortress-Classic and run it. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install TeamFortress2 and run it. It will also install SteamCMD (you can have multiple installations with only one steamcmd directory, check out my other containers). ATTENTION: First Startup can take very long since it downloads the game server files! PUBLIC PLAY: If you want that your server is public listed you must add '+sv_setsteamaccount YOURTOKEN' to the GAME_PARAMS (without the quotes and replace YOURTOKEN with your token). Create your token here: https://steamcommunity.com/dev/managegameservers (every gameserver needs it's own token!!!) Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This container will download and install TeamSpeak3 Server. FIRST RUN: at first run the token will be displayed in the log (also don't forget to accept the license in the template). UPDATE NOTICE: The container will check on every start/restart if there is a newer version of the server available and install it.

This Docker will download and install a simple Teeworlds Dedicated server with a autoexec.cfg, dm.cfg, tdm.cfg & ctf.cfg preconfigured (the only thing that need to be changed is the Server Name and the RCON Password in the autoexec.cfg). ATTENTION: Please don't delete the tar.gz file in the main directory! Update Notice: Simply restart the container if a newer version of the game is available and the container will download and install it.

This Docker will download and install Terraria and run it. SERVER PASSWORD: Docker ATTENTION: First Startup can take very long since it downloads the gameserver files and creates the map! Update Notice: The Container will check on every start/restart if there is a newer version of the game available and install it if so. WEB CONSOLE: You can connect to the Terraria console by opening your browser and go to HOSTIP:9012 (eg: 192.168.1.1:9012) or click on WebUI on the Docker page within Unraid.

This Docker will download and install Terraria and the TShock MOD and run it. SERVER PASSWORD: Docker ATTENTION: First Startup can take very long since it downloads the gameserver files and creates the map! Update Notice: The Container will check on every start/restart if there is a newer version of the game available and install it if so. WEB CONSOLE: You can connect to the Terraria console by opening your browser and go to HOSTIP:9014 (eg: 192.168.1.1:9014) or click on WebUI on the Docker page within Unraid.

This Docker will download and install SteamCMD. It will also install TerraTech Worlds and run it. ATTENTION: First Startup can take very long since it downloads the gameserver files! Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install SteamCMD. It will also install The Forest and run it. SERVERNAME: 'The Forest Docker' SERVERPASSWORD: 'Docker' ADMINPASSWORD: 'adminDocker' (you can change this in your SERVERFOLDER/config/config.cfg) BETA Warning: Since this Docker runs with WINE it's marked as BETA, i can not guarantee if the server is running always as expected! ATTENTION: First Startup can take very long since it downloads the gameserver files! WARNING: You have to create a Steam Token to play Online. Create your token here: https://steamcommunity.com/dev/managegameservers (please note that you must generate the token for the APPID: '242760' and every gameserver needs it's own token!!!). After creating your token you have to go to the file .../theforest/config/config.txt and append your token to the line that starts with: serverSteamAccount (eg: serverSteamAccount YOURTOKEN). Update Notice: Simply restart the container if a newer version of the game is available. You can also run multiple servers with only one SteamCMD directory!

This Docker will download and install SteamCMD. It will also install The Front and run it. Initial server configuration: Servername: The Front Docker Password: Docker Your configuration file is located at: .../TheFrontManager/ServerConfig_.ini ATTENTION: First startup can take very long since it downloads the gameserver files and it also installs the runtimes which can take quite some time! Update Notice: Simply restart the container if a newer version of the game is available.

TheLonge is the self-hosted web IRC client. Modern features brought to IRC, Always connected, Responsive interface, Synchronized experience The Lounge is the official and community-managed fork of Shout, by Mattias Erming. Multiple Users: If you want to create a new user simply change the name in the 'Username' variable and also the 'Password' variable, this will have no impact to existing users (the 'Username' variable can't be empty and should always have a username in it that is available on the server).

This container will download and install Thunderbird from the preferred branch and language. ATTENTION: If you want to change the language, you have to delete every file in the 'thunderbird' directory except the 'profile' folder. RESOLUTION: You can also change the resolution from the WebGUI, to do that simply click on 'Show more settings...' (on a resolution change it can occour that the screen is not filled entirely with the Thunderbird window, simply restart the container and it will be fullscreen again).

This container will download and install Tor-Browser. RESOLUTION: You can also change the resolution from the WebGUI, to do that simply click on 'Show more settings...' (on a resolution change it can occour that the screen is not filled entirely with the Tor Browser window, simply restart the container and it will be fullscreen again).

This package contains the UGREEN LED Driver which will allow you to get your LEDs to work on your UGREEN NAS (please note that not all models are supported). The plugin is based on: https://github.com/miskcoo/ugreen_dx4600_leds_controller